Planet IP30 Industrial 1-Port 60W Ultra POE to 4-Port 802.3af/at Gigabit POE Extender (-40 to 75 C)

• 5-port 10/100/1000BASE-T Gigabit RJ45 interface- 1-port data + power input– 4-port data + power output

Power over Ethernet

• 1-port data + power input- Complies with ultra Power over Ethernet end-span and mid-span PD- Complies with IEEE 802.3at High Power over Ethernet end-span / mid-span PD- Supports PoE input power up to 60 watts
• 4-port data + power output- Complies with IEEE 802.3af / IEEE 802.3at Power over Ethernet / end-span PSE- Up to 4 IEEE 802.3af / 802.3at devices powered- Supports PoE power up to 30.8 watts for each PoE port- Auto detects powered device (PD)

• Extends the range of PoE to an additional 100 meters (328ft.)
• Forwards both Ethernet data and PoE power to remote device

Layer 2 Features

• Hardware based 10/100Mbps, half / full duplex and 1000Mbps full duplex mode, flow control, auto-negotiation and auto MDI/MDI-X
• Features Store-and-Forward mode with wire-speed filtering and forwarding rates
• IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation
• Integrates address look-up engine, supporting 8K absolute MAC addresses
• 9K jumbo frame support in 1000Mbps duplex mode
• Automatic address learning and address aging
• Supports CSMA/CD protocol

Industrial Case / Installation

• IP30 metal case
• DIN rail and wall-mount design
• Supports EFT protection for 6000V DC power, and 6000V DC Ethernet ESD protection
• -40 to 75 degrees C operating temperature
• No external power cable required for installation
• Plug and Play installation
• LED indicators for each port in use and PoE power usage (25%, 50% and 75% )

Standards Compliance

• IEEE 802.3 10BASE-T
• IEEE 802.3u 100BASE-TX
• IEEE 802.3ab 1000BASE-T
• IEEE 802.3x Flow Control
• IEEE 802.3at High Power over Ethernet
• IEEE 802.3af Power over Ethernet
• FCC Part 15 Class A, CE